Coherent control of symmetric and asymmetric diffraction grating via relative phase

ABSTRACT

We present a theoretical model to realize the symmetric and asymmetric diffraction grating in a four-level atomic medium. The proposed atomic medium follows a double lambda configuration where four fields interact with it. We get control over symmetric and asymmetric behavior of the diffraction grating by manipulating the relative phase of the fields. Interestingly, the symmetric and asymmetric diffraction grating become prominent when the vortex beam is used instead of the plane wave. Enhanced first, second, and third-order diffraction gratings are achieved via the vortex beam. Further, we find control over asymmetric diffraction gratings by the relative phase of the fields. Coherent control of asymmetric diffraction grating in negative and positive diffracted angles is also achieved via the relative phase.     

Theoretical calculation simulation studies of ABV nuclear reactor coupled with desalination system

In this paper, research has been conducted on the floating type nuclear power plant named as ABV reactor which is designed for district heating, power, and sea water desalination by OKBM facility at Russia. This reactor was tested under different thermal loads during the designing phase, and three modules have been investigated. Theoretical calculations and simulation studies have been performed on these three modules having specifications as ABV‐6M with 47MW_th, ABV‐6 with 38MW_th, and ABV‐3 with 18MW_th.The results obtained from these modules have been calculated mathematically and verified by simulation. We have compared the originally derived data of ABV desalination system with our theoretical and simulation analysis. The results from two desalination techniques including RO and RO + MED have been calculated and are presented in this paper with details. The results obtained from both analysis show that the efficiency of ABV nuclear reactor desalination system increases with the decrease in corresponding water cost ratio. Copyright © 2015 John Wiley & Sons, Ltd.     

DEA window analysis and Malmquist index to assess energy efficiency and productivity in Jordanian industrial sector

This research evaluates the energy efficiency and productivity growth in the industrial sector over the period of 1999 till 2013 using data envelopment analysis (DEA). Two cases are analyzed; in the first case (GVA), the output is the gross value added, whereas two outputs are considered in the second case (GCO), CO₂ emission and GVA. Five key input factors are considered in both cases. From DEA window analysis, the technical inefficiency (TIE) values are zeros in windows (2001–2005) till (2003–2007), (2007–2011), and (2008–2012), whereas the pure technical inefficiency (PTIE) values are zeros in windows (1999–2003) till (2003–2007). Finally, the scale inefficiency (SIE) values are zeros in windows (2001–2005) till (2003–2007). These results help policy planners on how to better utilize resources and management efficiency over time and guide operational managers when to increase or decrease the scale. Moreover, the averages of inefficiency values in the GVA case are smaller than their corresponding in the GCO case, which indicates the negative effect of CO₂ emission on efficiency. Further, Malmquist index is estimated for three 5-year energy plans. The productivity index is found less than one for the third plan (2009–2013), which indicates a decrease productivity growth. In conclusions, research results provide valuable support when assessing the progress of energy efficiency and productivity in industrial sector.     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.     

Household biomass fuel use is associated with chronic childhood malnutrition: Result from a nationwide cross-sectional survey in Bangladesh

Despite significant investment, childhood malnutrition continues to be a significant public health problem especially in least developed countries. The aim of this study was to find association between household biomass fuel (BMF) use and childhood malnutrition in Bangladesh using data from Demographic and Health Survey 2011. We included a total 6891 children under 5 years of age in the analysis. The prevalence of wasting, underweight, and stunting from BMF using household was 16.1% (n = 997; 95%CI, 15.1–17.3), 39.0% (n = 2399; 95%CI, 37.1–40.9), and 43.3% (n = 2620; 95%CI, 41.6–45.1), respectively. Underweight and stunting were significantly higher among children from households using BMF compared with the children from CF using households (underweight, biomass vs clean fuel: 39.0% vs. 23.5%, p < 0.001; stunting, biomass vs clean fuel: 43.3 vs. 31.5%, p < 0.001). The use of BMF in the household was significantly associated with underweight (OR = 1.38; 95%CI: 1.10–1.73) and stunting (OR = 1.58; 95%CI: 1.18–1.98) among children <5 years of age after adjusting possible confounders in mixed effect logistic regression analysis. This study found a significant association between chronic childhood malnutrition and household BMF use which is indicating possible alternative risk factor for malnutrition. Further prospective research is required to explore the mechanism of how BMF use results in chronic malnutrition.     

Influence of additive materials on the roughness of AISI D2 steel in electrical discharge machining (EDM) environment

The quality of the machined surface resulted from the electrical discharge machining (EDM) environment is not efficient according to the previous studies. One of the significant problems is the impedance of dielectric fluid, where it is contributing to focusing the plasma channel in a limited area. Hence, this behavior leads to appearing deep craters on the machined zone. The researchers have attempted to enhance the average of surface roughness by employing powder particles or surfactant as the additive materials in the dielectric fluid. Unfortunately, these studies did not present a comparison between these additive materials in this environment. Therefore, the present study aims to compare the performance of the average of surface roughness (R_a) for AISI D2 steel by utilizing Nano chromium powder (NCP) and Span-20. The present work has proved that the behavior of the average of surface roughness for this steel is dropping at the maximum level of Nano chromium powder concentration and pulse duration as compared to the behavior with the Span-20. Moreover, the best roughness was produced by this steel with Nano chromium powder at 2 g/L and 20 μs for this powder and the pulse duration.     

Synergistic effect of nanoparticles and Thalassospira sp. isolated from Bahregan area in biodegradation of oil sludge

Oil sludge is obtained from the contaminated site of Bahregan area in the Persian Gulf in Iran. Chemotaxis was used for the isolation of alkane-degrading bacteria from oil sludge and the alk genes were determined with specific primers. bac1 identified in Thalassospira was selected as a powerful strain for biodegradation of oil sludge. Biodegradation of oil sludge by bac1 in the presence of nanoparticles was investigated by GC-MS analysis. Synergistic effect of Fe₂O₃ and Fe₃O₄ nanoparticles on bacteria increases the biodegradation of oil sludge and produces cyclosiloxane compound which is used in the field of medicine; however, the Thalassospira reduced its toxicity in the environment.     

Castor oil-based polyurethane coatings containing benzyl triethanol ammonium chloride: synthesis,characterization, and biological properties

In the present work, benzyl triethanol ammonium chloride (BTEAC) was employed as a reactive bactericidal additive for preparing of polyurethane coatings. In this regard, castor oil as a renewable resource-based polyol, polyethylene glycol (PEG1000), and BTEAC were reacted with toluene diisocyanate. Physical, mechanical, and thermal characteristics as well as biocompatibility and antibacterial properties of polyurethanes were evaluated. The prepared polyurethanes showed two-phase structure with soft and hard segments glass transition temperature transitions in the range of 18–70 and 85–153 °C, respectively. Initial modulus and tensile strength were improved for coatings with higher BTEAC content, while elongation at break and thermal stability were decreased. Hydrophilicity of coatings was increased for polyurethanes based on higher content of BTEAC and PEG1000. Polyurethanes with higher BTEAC content showed better cytocompatibility for mouse L929 fibroblast cells. Moreover, coatings with higher hydrophilicity and BTEAC content displayed superior antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.